The Virtues of Radiant Cut Engagement Rings

February 9th, 2010 No comments »

Radiant cut engagement rings are probably among the latest additions to the engagement rings ‘cuts’ family; the radiant cut in question being one that came up two or so decades ago. Of course, while there are other engagement ring cuts that have come up much later in years after the radiant cut, the radiant cut engagement rings are rated as ‘relatively young’ members of the engagement rings family when you take into consideration the fact that they are being viewed alongside other ‘cuts’ that are centuries old.

As the name suggests, what sets radiant cut engagement rings apart (and what in effect defines them) is their brilliance: these being rings that are much more brilliant than even the standard emerald cut engagement rings that were for long considered the most brilliant members of the engagement rings cuts family.

While it is possible to make radiant cut engagement rings in quite a huge variety of shapes, the rectangular shape is by far the commonest of these. The defining feature of the radiant cut in an engagement ring, besides its brilliance, is typically the bowtie effect created by what can be termed as the ‘fine chiseling’ towards the center of the rock. Of course, while some people find the bowtie effect alluring, there are some who feel that it tends to be a distraction from the radiant cut’s core brilliance, which is a much more attractive feature in the ring, according to them.

So in the final analysis, we have different people finding two different features in radiant cut engagement rings alluring: namely the cut of the ring and brilliance of the cut which are characteristic of the radiant cut engagement rings.

People who are extremely modest, however, might not love the radiant cut engagement rings so much, because when all is said and done, radiant cut engagement rings ooze flamboyance through and through; and are therefore the very kind of rings that a person who tends towards extreme modesty can find off-putting. This is an important factor, by the way, because there have been cases of men purchasing radiant cut engagement rings for their fiancées (who happened to be highly modest people) only for the supposed recipients of the rings to exclaim that the wouldn’t be seen dead in such ‘conspicuous’ engagement rings: often sending the said suitors back to try and get a more ‘modest’ engagement ring.

Of course, at the other end of the spectrum in terms of preferences, if you know your fiancée to be a person who doesn’t mind ‘standing out’ from the crowd (or better still, if you know her to be a person who actually cherishes such standing out from the pack), then the radiant cut engagement ring might be the perfect ring to present her with.

Ultimately, radiant cut engagement rings are really the types of engagement rings that one cannot simply ignore; because they are so attention grabbing: and as long as your lady is comfortable with the flamboyance and extravagant aura they exude, you can be sure that presenting her with one such ring is sure to make you come across as a man with a highly refined taste in terms of rings style.

No comments »

Posted in Diamond Engagement Rings

Tags:

Why a 4 Carat Diamond Ring Might Look Like a 2 Carat Diamond Ring

February 2nd, 2010 No comments »

Shopping for jewelry, while a potentially enjoyable undertaking, can often be a confusing one too. Take the example of diamond, one of the most widely shopped for jewelry products, and which typically finds application on rings and watches. Now one thing people shopping for diamond rings often complain about is the fact that although the diamond rings are typically sold on the basis of their carat weight (so that a 4 carat diamond ring is expected to cost more than a 1 carat diamond ring, for instance), it is often very difficult to make sense of the carat measure and its implications on the size of the rock on the ring.

To sympathize with the sentiment that carat weight can add confusion (rather than clarity) to the jewelry shopping experience, it would help to appreciate that in many people’s estimation, the bigger the rock at the center of the ring, the more alluring and prestigious the said ring comes across to them. So as many people go shopping for jewelry (especially on online diamond shops where you cannot actually physically see the product being sold), their expectation when opting for something like a 4 carat diamond ring is that they will have a ring with a gigantic rock delivered to them. This often leads to bitter frustrations, when the said 4 carat diamond ring is ultimately delivered to them only for it to turn out to be a ring with more or less of an ordinary-sized rock at its center. This leads to a situation where the said people could be left feeling that they were sold a 2 carat ring in the name of a 4 carat ring – a situation that naturally lead to further bitterness because few things in life feel as bad as ‘being taken advantage of.’

So how does it come about that a 4 carat diamond ring can seem to be more or less equal to a 2 carat ring size-wise? Well, the answer to this question lies in appreciating the fact that carat measures a diamonds weight (the carat itself being about 200 milligrams – that is a fifth of a gram); and further appreciating the fact that the weight of anything does not always give us a full picture as to what the size of the said thing is.

So it follows that if what you are looking for is a ring with a huge rock at its center, then you need to look at more than carat weight in shopping for it if you are to avoid the situation where, for instance, you are left feeling that you have been sold a 2 carat ring in the name (and at the price) of a 4 carat diamond ring. Beyond the carat weight of the diamond, you need to also look at the diamond’s size in millimeters (which most vendors will tell you, if you ask them explicitly) and the diamond’s cut grade, both of which are the other factors that when looked in conjunction with the diamond’s carat weight, can give you insight as to what the size of the rock is.

No comments »

Posted in Other Diamond Rings

All About Pear Shaped Engagement Rings

January 25th, 2010 No comments »

Contrary to what many of us imagine, pear shaped engagement rings are not a very new creation. Indeed, in jewellery circles, the style that produces these pear shaped engagement rings is considered a ‘classic configuration.’ Nonetheless, it is only in recent days that pear shaped engagement rings have become very popular. Their popularity is mainly attributed to their unique look – and to what are virtually ‘celebrity endorsements:’ where several opinion leaders have opted for the pear shape in their engagement rings. In what has been termed as a ‘celebrity obsessed culture’ as ours, anything that these opinion leaders endorse by way of wearing instantly becomes fashion. Yet this is not to depreciate the true beauty of pear shaped engagement rings, because truth be told, even without celebrity endorsements, they would still eventually have come to be liked as people came to learn about them.

At their core, pear shaped engagement rings can be seen as being the progeny of two other popular shapes: the marquise and the oval shapes (which combine to make the overall ‘pear shape).

Naturally brilliant stones work best in making the pear shaped engagement rings. Diamond is the default stone, out of which pear shaped engagement rings are made.

There are many settings in which pear shaped engagement rings can be made: mainly depending on the preferences of the people shopping for them.

Most opt for the solitaire setting, as it is arguably the setting that best brings out the simple elegance of the pear shaped engagement rings.

Still, pear shaped engagement rings are also available as bridal sets, accented settings or cluster settings.

Due to the pear shape (which is pointed on one end, and round at the other), the person buying a pear shaped engagement ring has the option of either wearing it with the sharp end of the pear point toward the hand or away from the hand. Going with either is a matter of personal preference, though wearing it point away from the hand has the effect of visually elongating the finger; a good thing for some wearers.

No comments »

Posted in Engagement Ring Designs

Tags:

Designer Diamonds Explored

January 19th, 2010 No comments »

Diamond jewellery, and loose diamonds on sale can be seen as falling into two categories: designer diamonds and the so-called ‘ordinary’ diamonds. To be sure, this distinction between designer diamonds and ‘ordinary’ diamonds does not come out very clearly in loose diamonds, but rather in the diamond jewellery. This is where we end up with ‘designer’ diamond rings, bracelets, earrings and so on – as opposed to ‘commonplace/ordinary’ diamond rings, bracelets, earrings and so on.

A number of features qualify an item to be either considered as belonging to the ‘designer diamonds’ category or the ‘ordinary’ diamonds category.

One is the ‘brand’ name behind the diamond item we are looking at. Just as a clothing item may qualify to be considered a ‘designer’ item by virtue of coming from such and such a fashion house, there are certain diamond vendor/maker brands that have made a ‘name’ for themselves, so that anything coming from them is considered a ‘designer’ item by default.

Yet the brand alone – while substantial – may not in most cases be enough to make a given item to be considered a ‘designer’ diamond.

Careful choice of diamonds, is therefore another important factor that goes into the making of items that end up being considered ‘designer diamonds.’ Designer diamonds are made from choice diamonds – the very best quality diamonds, because as it turns out, diamond comes in a variety of quality ratings. Of the 4 Cs of diamond, 3 come into consideration here: clarity, colour and carat weight in the sorting of ‘choice diamonds’ from ordinary/lacklustre diamonds.

The craftsmanship employed in making the items in question is yet another factor that goes into their qualification to be termed as designed diamonds. The fourth of the Cs associated with diamond, the ‘cut,’ is considered here. Designer diamonds are carefully crafted, typically by the hand, so that their makers can boast of their hand (rather than machine) crafting as another of their strong selling points.

No comments »

Posted in Other Diamonds

Tags:

Engagement Rings: Solitaire Settings Explained

January 15th, 2010 No comments »

The term ‘solitaire settings’ as used with regard to engagement rings, refers to the setting of the jewels on the rings: where only a single (solo) gem is used. It is categorized as a traditional ‘classic’ setting, and is one of the most popular such classic settings.

Solitaire settings come out best with some metals than others. Diamond is one of the metals with which the solitaire setting works best. Gold, too works well in bringing out the solitaire setting. In either case, it is the metal in question (gold or diamond in these cases) which is to be seen on the ring: hence the name ‘solitaire.’

People who want to ‘remain proper’ and stick with tradition are the people who are likely to find solitaire settings most appealing. Like the wedding gown (which is to be eventually worn, should the engagement be successful), and which is traditionally meant to be white and pure, the solitaire engagement ring is also ‘pure’ and thus ‘proper.’

Besides purity, solitaire settings also ooze of elegance. This is indisputable, and according to some quite authoritative commentators on these matters, the introduction of other gems in rings (engagement or otherwise), has the effect of diluting elegance. Of course, this dilution of elegance not always a bad to all people: because in many people’s vocabulary, there is such a thing as ‘too much elegance.’ Yet for those who really want all elegance they can get, solitaire settings work best.

In many people’s view, solitaire settings also result in beauty: the sort of simple (rather than loud) beauty, which is what many men are looking for in the women they present engagement rings to, who are typically women they are looking to eventually marry. This is what is otherwise referred to as ‘real beauty without much ado.’

No comments »

Posted in Engagement Ring Designs

Factors Behind the Popularity of the Bezel Engagement Ring

January 13th, 2010 No comments »

We should perhaps, start our exploration of the factors behind the popularity of the bezel engagement ring by understanding what the bezel engagement ring is, in the first place. As it turns out, the ‘bezel’ is one of the designs in which engagement rings are presented. At its core, the bezel is a raised collar, surrounding a jewel in a ring. Unlike other types of jewellery rings, where for all purposes and intents, the ‘jewel’ is exposed, in the bezel engagement ring, the jewel is protected by the bezel. This way, it doesn’t risk being detached from the ring, or corroded (in the case of metals that are prone to corrosion) in the course of its use.

From this explanation, it would obviously follow that this enhanced protection of the jewel is one of the factors behind the popularity of the bezel engagement ring. This is particularly attractive to people who are engaged in ‘active occupations’ where use of a plain engagement ring would call for having to frequently remove it (to avoid its damage)– which is definitely not what an engagement ring is meant for.

The unique look of the bezel engagement ring is another factor behind its popularity. The bezel engagement ring is the type of ring that you wear –and soon have everyone asking you about it. For those who love things that ‘stand out’ then, the bezel engagement ring comes across as one of those truly outstanding engagement rings.

The fact that the bezel engagement ring is not a plain one, but one that can be configured to various unique settings makes it all the more alluring.

So in the final analysis, we have in the bezel engagement ring the near-perfect ring: where practicality (thanks to the superior protection in the bezel) meets beauty and elegance.

No comments »

Posted in Engagement Ring Designs

Features that Set Cushion Cut Rings Aside

January 11th, 2010 No comments »

Cushion cut rings are very popular among couples looking for either engagement rings or wedding rings. This is especially so for couples that are interested in the so-called vintage rings – seeing that the cushion cut is considered one such ‘vintage cut.’

There are a number of features that set the cushion cut rings aside from the pack.

First is their elegant simplicity. A properly done cushion cut ring ends up oozing plenty of the so-called ‘unpretentious beauty’ – something that, incidentally, men are usually very keen on as a quality in their lifetime (rather than one evening) partners.

The square and rectangular shapes that make up the cushion cut are alluring to many people – and are in fact part of the package that accounts for the simple elegance of cushion cut rings. Numerous repetitions of these squares and rectangles all over the oval shape of the ‘rock’ on the ring has the effect of making the whole thing look like an overly-filled up seat cushion: hence the name of the cut.

The long history of the cushion cut is another factor that makes cushion cut rings popular, among couples with a liking for things classic and antique. As it turns out, this is a cut whose history goes as far back as the industrial ages: with its popularity having boomed for the whole of the 19th century and the early part of the 20th century: when the cushion cut was considered a contemporary cut.

Yet another factor setting aside cushion cut rings is their flexibility, in terms of styling. Granted, the cushion cut (like other vintage cuts), works best as a solitaire. Yet it can still come out reasonably well accented, so that the person opting for it doesn’t end up being constrained in terms of style.

No comments »

Posted in Other Diamond Rings, Uncategorized

Tags:

Four Things You Need to Know Before You Go to Buy Loose Diamonds

January 4th, 2010 No comments »

There are two forms in which you can buy diamonds. You can either buy diamonds that are integrated into various jewellery items (earrings, bracelets, rings and so on), or buy them as the so-called ‘loose diamonds.’ Loose diamonds are those ‘stand-alone’ pieces of diamonds. These, you can purchase for a number of purposes. You can purchase them for use as ‘keepsakes.’ You can purchase them for storage as real treasure (which you can unearth on a rainy day) seeing that money, in the form of cash, is too unstable for that purpose. You can also purchase them for use in replacing the ‘diamond bits’ in jewellery, where they happen to have fallen out and gotten lost, or damaged.

Now as you go out to buy such loose diamonds, there are some four things you really need to know.

First, you need to know, and master, the 4 C that matter in diamonds: cut, carat, colour and clarity – and how they manifest practically in diamonds.  This way, you won’t end up being sold a one carat loose diamond for the price of a two carat diamond by some unscrupulous dealer.

Secondly, you need to know what goes into the making of real diamonds (as opposed to fake diamonds). It is worth noting that fake diamonds – usually cleverly cut pieces of glass abound in the market, and beware of them.

Third, you need to know which the credible diamond certifying authorities are, and how genuine certification from them really looks like.

Fourth, you need to know what the reputation of the people you are considering buy loose diamonds from is really like. Most people who end up being duped into buying ‘crap’ in the name of loose diamonds turn out to be people who would have avoided that fate, had they just taken the trouble to really know the vendors. Scammers tend to be known – but you do have to research on their reputation, to know them.

No comments »

Posted in Other Diamonds

Tags:

Handy Tips When Looking for Engagement Ring Advice Online

December 28th, 2009 No comments »

If you are considering going shopping for engagement rings in the near future, you could find yourself first having to seek engagement ring advice, to guide you in the shopping.

As with any sort of advice nowadays, one of the first destination you are likely to end up looking for it is the Internet. The internet, in spite of fast turning into more of a social forum in recent days, has still remained true to the original purpose for which it was originally developed: the purpose of serving as a global ‘information resource centre.’

Still, if you are to get the best engagement ring advice online, there are number of things you will have to do.

One is to approach your search for engagement ring advice with an open mind. This is important, when searching for any type of advice, because our natural tendency is to look for ‘advice’ that confirms our biases, rather than advice which challenges those biases. Yet such ‘advice’ which only confirms what we already know is really not advice. The moral here is to approach your shopping for engagement ring advice with an open mind: a flexible mind that is ready to change in the face of new facts contrary to what was in it before.

Second is to ensure that you get your engagement ring advice from the best resources online. Ideally, websites that have no direct interest in the jewelry industry, but which are only there for the purpose of giving objective advice work best.

Third is to ensure that you actually take the advice you get seriously and act on it. Many people will go to great lengths looking for advice, only to disregard it when ‘action time’ comes. Don’t fall into this trap. Remember, there is no point in looking for advice when you are sure to end up being taken-in by the sweet-talk of a salesman, and ignore the advice when you should be putting it to practice (at purchase time).

No comments »

Posted in Uncategorized

Tags:

How can I find a Good Bracelet With Diamonds?

December 26th, 2009 No comments »

The question as to where one can find a good bracelet with diamonds might seem like a ‘petty one:’ until you happen to be the one looking for such a piece of jewellery. Diamond, being the precious and beautiful metal it is, does not come cheap. As such, you can expect that you will be spending a considerable sum of money on the bracelet with diamonds. Consequently, you will find yourself being really keen to get a truly good one: hence the question as to how you can find a good bracelet with diamonds.

There are basically two places from which you buy bracelets with diamonds (and other diamond-based pieces of jewellery). You can either purchase them in brick and mortar stores that deal with jewellery, or you can opt to take advantage of technology and purchase them online. None of these options is really superior over the other: though many people do find the option of shopping online more alluring in terms of the convenience it offers.

If you are to get a good bracelet with diamonds online, you do have to plan your shopping in advance: before you embark on it. Be clear on what you want, and you increase you chances of getting it. Unplanned (haphazard) shopping is the source of many regrets.

If you re to get a truly good bracelet with diamonds, be ready to pay the right price for it. Remember, when all is said and done, you end up getting just what you pay for. Take note though, that by ‘thinking outside the box’ and shopping for the jewellery through unconventional methods, such as auctions, you could still end up getting truly good jewellery at fantastic prices.

If you are to get a truly good bracelet with diamonds, do ensure that you go shopping for it at the right places. The ideal places are the reputable stores – the sort of stores that would never dream of selling ‘fake’ jewellery; as they have reputations to protect.

No comments »

Posted in Other Diamonds

Tags: